One-piece construction
Monoblock Forged Wheels
Face and barrel machined from a single forged billet. The lightest of the two constructions and the shorter lead time, with the barrel width set by the blank. Every design below can also be built as two-piece.
What this construction gives you
- Diameter 16–28 inch; width and offset made to order
- Paint, brushed or fine-polished finishes, and two-tone across a single face
- Electroplating adds a week to the lead time
- 6061 aerospace aluminum, minimum of four
Need a deeper lip or a separately finished barrel? The same designs in two-piece.
Two-piece designs
One piece — nothing bolted.
Specification
Material, sizing, testing and minimum order are the same on both constructions — only the lead time and the finish options change.
| Spec | Detail | Notes |
|---|---|---|
| MATERIAL | 6061 aerospace aluminum | Forged, then machined — the face is cut from solid, not cast to shape |
| CONSTRUCTION | Monoblock or two-piece | Two-piece covers the wider offset range |
| SIZING | Diameter, width and offset made to order | Send the vehicle and the fitment; wide-arch builds need the arch data too |
| FINISHES | Custom colors and styles | Electroplating and carbon wrapping available, each with its own lead time |
| TESTING | Safety, load and runout checked before packing | Load, balance and runout tested on the rig before packing |
| MINIMUM ORDER | Four wheels | Wheels can be added to an aero order — there is no separate account minimum |
Surcharges for finishes and carbon lips are listed under Finishes. The base price of a wheel depends on construction, diameter and width, and is quoted per order — quotes come back with the lead time attached.
The catalog
16 monoblock designs
The code is what goes on the quotation — diameter, offset and finish are set per order. Tap a wheel to page through its angles.
Most photographs show finishes CMST has already built, not a fixed specification. Diameter, width, offset, bolt pattern and finish are set per order, in either construction.
Send the fitment and the finish
Quotes come back with construction options, finish choices and a lead time. Tuning shops and distributors only.